diff options
Diffstat (limited to 'inxi.1')
| -rw-r--r-- | inxi.1 | 146 |
1 files changed, 104 insertions, 42 deletions
@@ -1,5 +1,5 @@ .\" inxi.1 - manpage for inxi system information tool -.\" Copyright (C) 2021 Harald Hope +.\" Copyright (C) 2022 Harald Hope .\" .\" This program is free software; you can redistribute it and/or modify .\" it under the terms of the GNU General Public License as published by @@ -15,7 +15,7 @@ .\" with this program; if not, write to the Free Software Foundation, Inc., .\" 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. .\" -.TH INXI 1 "2022\-03\-24" "inxi" "inxi manual" +.TH INXI 1 "2022\-04\-08" "inxi" "inxi manual" .SH NAME inxi \- Command line system information script for console and IRC @@ -62,6 +62,51 @@ filtering with the \fB\-z\fR option (\fB\-Fz\fR, for example). To override the IRC filter, you can use the \fB\-Z\fR option. This can be useful in debugging network connection issues online in a private chat, for example. +.SH TABLE OF CONTENTS +This man page is pretty long and information packed. It is divided into the +following sections: + +* \fBUSING OPTIONS\fR How to use the command line options. + +* \fBSTANDARD OPTIONS\fR Primary data types trigger items. + +* \fBFILTER OPTIONS\fR Apply a variety of output filters. + +* \fBOUTPUT CONTROL OPTIONS\fR Change default colors, widths, heights, output +types, etc. + +* \fBEXTRA DATA OPTIONS\fR What \fB\-x\fR, \fB\-xx\fR, and \fB\-xxx\fR add to +the output per primary data type. + +* \fBADMIN EXTRA DATA OPTIONS\fR What \fB\-a\fR adds to the output per primary +data type. These have a lot of information because this is advanced admin data, +which are not always intuitive or easy to understand. + +* \fBADVANCED OPTIONS\fR Modify behavior or choice of data sources, and other +advanced switches. + +* \fBDEBUGGING OPTIONS\fR For development use mainly, or contributing datasets +to the project. + +* \fBDEBUGGING OPTIONS TO DEBUG DEBUGGER FAILURES\fR Only for advanced users, +sometimes something will hang the debuggers, this shows you various ways to get +around those failures. + +* \fBSUPPORTED IRC CLIENTS\fR List of known good IRC clients. Not checked often, +let us know if something is not working. + +* \fBRUNNING IN IRC CLIENT\fR How to run inxi in various IRC clients. + +* \fBCONFIGURATION FILE\fR Configuration file locations and priority in using. + +* \fBCONFIGURATION OPTIONS\fR Most of the commonly used configuration options, +along with sample values. + +* \fBBUGS\fR How and where to report bugs. + +* \fBHOMEPAGE\fR, \fBAUTHOR AND CONTRIBUTORS TO CODE\fR, \fBSPECIAL THANKS TO +THE FOLLOWING\fR These are self explanitory. + .SH USING OPTIONS Options can be combined if they do not conflict. You can either group the letters together or separate them. @@ -79,24 +124,6 @@ Note that all the short form options have long form equivalents, which are listed below. However, usually the short form is used in examples in order to keep things simple. -These are available options sections: - -* \fBSTANDARD OPTIONS\fR Primary data types trigger items. - -* \fBFILTER OPTIONS\fR Apply a variety of output filters. - -* \fBOUTPUT CONTROL OPTIONS\fR Change default colors, widths, heights, output -types, etc. - -* \fBEXTRA DATA OPTIONS\fR What \fB\-x\fR, \fB\-xx\fR, \fB\-xxx\fR, and \fB\-a\fR -add to the output. - -* \fBADVANCED OPTIONS\fR Modify behavior or choice of data sources, and other -advanced switches. - -* \fBDEBUGGING OPTIONS\fR For development use mainly, or contributing datasets to -the project. - .SH STANDARD OPTIONS .TP @@ -444,13 +471,12 @@ Other types of logical block handling like LUKS, bcache show as: .TP .B \-m \fR, \fB\-\-memory\fR -Memory (RAM) data. Does not display with \fB\-b\fR or \fB\-F\fR unless you -use \fB\-m\fR explicitly. Ordered by system board physical system memory -array(s) (\fBArray\-[number]\fR), and individual memory devices -(\fBDevice\-[number]\fR). Physical memory array data shows array capacity, -number of devices supported, and Error Correction information. Devices shows -locator data (highly variable in syntax), size, speed, type -(eg: \fBtype: DDR3\fR). +Memory (RAM) data. Does not display with \fB\-b\fR or \fB\-F\fR unless you use +\fB\-m\fR explicitly. Ordered by system board physical system memory array(s) +(\fBArray\-[number]\fR), and individual memory devices (\fBDevice\-[number]\fR). +Physical memory array data shows array capacity, number of devices supported, +and Error Correction information. Devices shows locator data (highly variable in +syntax), type (eg: \fBtype: DDR3\fR)size, speed. Note: \fB\-m\fR uses \fBdmidecode\fR, which must be run as root (or start \fBinxi\fR with \fBdoas/sudo\fR), unless you figure out how to set up doas/sudo @@ -488,11 +514,11 @@ If the detected speed is logically absurd, like 1 MT/s or 69910 MT/s, adds: \fBMemory: RAM: total: 31.38 GiB used: 20.65 GiB (65.8%) Array\-1: capacity: N/A slots: 4 note: check EC: N/A - Device\-1: DIMM_A1 size: 8 GiB speed: 1600 MT/s (800 MHz) - Device\-2: DIMM_A2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) + Device\-1: DIMM_A1 type: DDR3 size: 8 GiB speed: 1600 MT/s (800 MHz) + Device\-2: DIMM_A2 type: DDR3 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 61910 MT/s (30955 MHz) note: check - Device\-3: DIMM_B1 size: 8 GiB speed: 1600 MT/s (800 MHz) - Device\-4: DIMM_B2 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) + Device\-3: DIMM_B1 type: DDR3 size: 8 GiB speed: 1600 MT/s (800 MHz) + Device\-4: DIMM_B2 type: DDR3 size: 8 GiB speed: spec: 1600 MT/s (800 MHz) actual: 2 MT/s (1 MHz) note: check\fR .fi @@ -1286,8 +1312,6 @@ tracking down which device belongs to what. Only some systems will have this data available. Shows estimate if it can generate one. -\- Adds device type in the Device line. - .TP .B \-x \-N\fR \- Adds (if available and/or relevant) \fBvendor:\fR item, which shows @@ -1333,8 +1357,7 @@ found for each distribution system base detection. .TP .B \-x \-\-slots\fR -\- Adds \fBbus\-ID:\fR. Note that this bus ID does not unfortunately appear to -be readily detected as the source bus ID for any particular device bus ID. +\- Adds slot \fBbus\-ID:\fR, if found. .TP .B \-x \-t\fR (\fB\-\-processes\fR) @@ -1531,6 +1554,11 @@ serial number. 100% right all of the time since it depends on the order that data is found in \fBdmidecode\fR output for \fBtype 6\fR and \fBtype 17\fR. +\- Adds, if present, memory array voltage. Only some legacy systems will have +this data available. + +\- Adds memory module current configured operating voltage, if available. + .TP .B \-xx \-M\fR \- Adds chassis information, if data is available. Also shows BIOS @@ -1575,6 +1603,8 @@ running. If none found, shows nothing. Uses a less accurate fallback tool .B \-xx \-\-slots\fR \- Adds slot length. +\- Adds slot voltage, if available. + .TP .B \-xx \-w \fR, \fB\-W\fR \- Adds wind chill, heat index, and dew point, if available. @@ -1686,18 +1716,24 @@ uses the \fBwhoami\fR test. .TP .B \-xxx \-m\fR, \fB\-\-memory\-modules\fR \- Adds memory bus width: primary bus width, and if present, total width. e.g. -\fBbus width: 64 bit (total: 72 bits)\fR. Note that total / data widths are -mixed up sometimes in dmidecode output, so inxi will take the larger value as -the total if present. If no total width data is found, then inxi will not show -that item. -\- Adds device Type Detail, e.g. \fBdetail: DDR3 (Synchronous)\fR. +\fBwidth (bits): data: 64 total: 72\fR + +Note that total / data widths are mixed up sometimes in dmidecode output, so +inxi will take the larger value as the total if present. \fBData\fR width +usually corresponds to the CPU bits. \fBTotal\fR can reflect EEC or Dual Channel +widths. If no total width data is found, shows: -\- Adds, if present, memory module voltage. Only some systems will have this -data available. +\fBwidth: N/A\fR + +\- Adds device type detail, e.g. \fBtype: DDR3 detail: Synchronous\fR. \- Adds device serial number. +\- Adds memory module current, max, and min voltages, if they are available and +different from each other. If they are the identical, displays same as +\fB\-xxm\fR voltage report. Use \fB\-ma\fR to always see them. + .TP .B \-xxx \-N\fR \- Adds, if present, serial number. @@ -2022,6 +2058,10 @@ mapped name for logical components. Puts each component/device on its own line. \- Adds maj-min to LV and other devices. .TP +.B \-a \-m\fR +\- Expands volts to include curr/min/max values even if they are all identical. + +.TP .B \-a \-n\fR, \fB\-a \-N\fR, \fB\-a \-i\fR \- Adds, if present, possible \fBalternate:\fR kernel modules capable of driving each \fBDevice\-x\fR (not including the current \fBdriver:\fR). If no @@ -2071,6 +2111,28 @@ Component report to 1 component per line. \- Adds kernel boot parameters to \fBKernel\fR section (if detected). Support varies by OS type. +.TP +.B \-a \-\-slots\fR +\- Adds PCI children of the main slot bus ID, and their types and class IDs, +recursively. Linux only, and only if detected. Sample: + +.nf +\fBSlot: 0 + type: PCIe + lanes: 16 + status: in use + length: long + volts: 3.3 + bus\-ID: 00:03.1 + children: + 1: 07:00.0 + class\-ID: 0300 + type: display + 2: 07:00.1 + class\-ID: 0403 + type: audio\fR +.fi + .SH ADVANCED OPTIONS .TP |