CLI Current database: %1 Поточна база даних: %1 No current working database is set. Поточна робоча база даних не визначена. Type %1 for help Введіть %1 для виклику довідки Database passed in command line parameters (%1) was already on the list under name: %2 База даних, передана через аргументи командного рядка (%1), вже знаходиться в списку під назвою %2 Could not add database %1 to list. Не вдалося додати базу даних %1 до списку. closed закрито CliCommand Usage: %1%2 Використання: %1%2 CliCommandAdd Could not add database %1 to list. Не вдалося додати базу даних %1 до списку. Database added: %1 База даних додана: %1 adds new database to the list додати нову базу даних до списку Adds given database pointed by <path> with given <name> to list the databases list. The <name> is just a symbolic name that you can later refer to. Just pick any unique name. For list of databases already on the list use %1 command. Додає базу даних, розташовану за вказаним <шляхом> під вказаним ім'ям <ім'ям> в список баз даних. <ім'я> - це звичайне символьне ім'я, яке в подальшому можна буде використовувати. Виберіть будь-який унікальне ім'я. Для отримання поточного списку баз даних за допомогою команди %1. name CLI command syntax ім’я path CLI command syntax шлях CliCommandCd Changed directory to: %1 Теку змінено на: %1 Could not change directory to: %1 Не вдалося змінити директорію на: %1 changes current working directory змінює поточну робочу директорію Very similar command to 'cd' known from Unix systems and Windows. It requires a <path> argument to be passed, therefore calling %1 will always cause a change of the directory. To learn what's the current working directory use %2 command and to list contents of the current working directory use %3 command. Дуже схожа команда до 'cd' відомої від Unix систем і Windows. Для проходження цього аргументу <path> необхідно перенести аргумент, тому виклик %1 завжди може викликати зміну каталогу. Щоб дізнатися те, що використовує поточну робочу папку, використовуйте %2 команду і щоб перерахувати вміст поточної робочої директорії використовуйте %3. path CLI command syntax шлях CliCommandClose Cannot call %1 when no database is set to be current. Specify current database with %2 command or pass database name to %3. Неможливо викликати %1, коли база даних не налаштована на поточну. Вкажіть поточну базу даних з командою %2, або передайте ім'я бази даних на %3. Connection to database %1 closed. Підключення до бази даних %1 закрито. No such database: %1. Use %2 to see list of known databases. Немає такої бази даних: %1. Використовуйте %2, щоб переглянути перелік відомих баз даних. closes given (or current) database закривається за вказаною (або поточною) базою даних Closes database connection. If the database was already closed, nothing happens. If <name> is provided, it should be name of the database to close (as printed by %1 command). The the <name> is not provided, then current working database is closed (see help for %2 for details). Закриває зв'язок з базою даних. Якщо база даних вже закрита, нічого не відбувається. Якщо <name> буде передбачено, то назва бази даних має бути закрита (як надруковано командою %1). <name> не передбачено, поточна робоча база даних закрита (детальніше дивіться довідку %2). name CLI command syntax назва CliCommandDbList No current working database defined. Поточна робоча база даних не визначена. Databases: База даних: Name CLI db name column Назва Open CLI connection state column Відкрити Closed CLI connection state column Закрити Connection CLI connection state column Підключення Database file path Шлях до бази даних prints list of registered databases друкує список зареєстрованих баз даних Prints list of databases registered in the SQLiteStudio. Each database on the list can be in open or closed state and %1 tells you that. The current working database (aka default database) is also marked on the list with '*' at the start of its name. See help for %2 command to learn about the default database. Друкує перелік баз даних, зареєстрованих у SQLiteStudio. Кожна база даних в списку може бути у відкритому або закритому стані і %1 повідомляє вам це. Поточна робоча база даних (база даних за замовчуванням) також позначена в списку з '*' на початку назви. Дивись довідку для %2 команди щоб дізнатися про типову базу даних. CliCommandDesc No working database is set. Call %1 command to set working database. Call %2 to see list of all databases. Робоча база даних не встановлена. Набрати %1 для встановлення робочої бази даних. Набрати %2 для перегляду списку всіх баз даних. Database is not open. База даних не відкрита. Cannot find table named: %1 Не вдалося знайти таблицю з назвою: %1 shows details about the table показати деталі про таблицю table таблиця Table: %1 Таблиця: %1 Column name Назва стовпця Data type Тип даних Constraints Обмеження Virtual table: %1 Віртуальна таблиця: %1 Construction arguments: Параметри створення: No construction arguments were passed for this virtual table. Не вказані параметри створення для цієї віртуальної таблиці. CliCommandDir lists directories and files in current working directory перелічує каталоги та файли в поточній робочій каталозі This is very similar to 'dir' command known from Windows and 'ls' command from Unix systems. You can pass <pattern> with wildcard characters to filter output. Це дуже схоже на команду 'dir' з Windows та 'ls' на команду з Unix систем. Ви можете передати <pattern> символами, які містять шаблони, щоб відфільтрувати вивід. pattern шаблон CliCommandExit quits the application вийти з додатку Quits the application. Settings are stored in configuration file and will be restored on next startup. Вийти з додатку. Налаштування зберігаються у файлі конфігурації і будуть відновлені при наступному запуску. CliCommandHelp shows this help message показати це довідкове повідомлення Use %1 to learn about certain commands supported by the command line interface (CLI) of the SQLiteStudio. To see list of supported commands, type %2 without any arguments. When passing <command> name, you can skip special prefix character ('%3'). You can always execute any command with exactly single '--help' option to see help for that command. It's an alternative for typing: %1 <command>. Використовуйте %1, щоб дізнатися про деякі команди, які підтримуються інтерфейсом командного рядка (CLI) з SQLiteStudio. Щоб переглянути список підтримуваних команд, введіть %2 без будь-яких аргументів. У назві <command> можна не вказувати префіксний символ ('%3'). Для отримання довідки по команді ви також можете виконати команду з єдиним ключем '--help'. Це альтернатива введенню: %1 <command>. command CLI command syntax команда No such command: %1 Немає такої команди: %1 Type '%1' for list of available commands. Введіть '%1' для отримання списку доступних команд. Usage: %1%2 Використання: %1%2 Aliases: %1 Псевдоніми: %1 CliCommandHistory Current history limit is set to: %1 Поточний ліміт історії встановлено на: %1 prints history or erases it друкувати історію або видалити When no argument was passed, this command prints command line history. Every history entry is separated with a horizontal line, so multiline entries are easier to read. When the -c or --clear option is passed, then the history gets erased. When the -l or --limit option is passed, it sets the new history entries limit. It requires an additional argument saying how many entries do you want the history to be limited to. Use -ql or --querylimit option to see the current limit value. Коли аргумент не був прийнятий, ця команда друкує історію командного рядка. Кожен запис в історії розділений по горизонтальній прямій, тож багаторічні записи легше зчитувати. Коли параметр -c або --clear, історія стирається. при проходженні параметра -l або --limitвстановлюється новий ліміт на кількість записів в історії. Необхідний додатковий аргумент, який вказує скільки записів необхідно зберігати в історії. Для перегляду поточного ліміту записів викличте команду з ключем -ql або --querylimit. number номер Console history erased. Історію консолі стерто. Invalid number: %1 Неприпустиме число: %1 History limit set to %1 Ліміт історії встановлено на %1 CliCommandMode Current results printing mode: %1 Поточний режим друку результатів: %1 Invalid results printing mode: %1 Недійсний режим друку результатів: %1 New results printing mode: %1 Поточний режим друку результатів: %1 tells or changes the query results format повідомляє або змінює формат результатів запиту When called without argument, tells the current output format for a query results. When the <mode> is passed, the mode is changed to the given one. Supported modes are: - CLASSIC - columns are separated by a comma, not aligned, - FIXED - columns have equal and fixed width, they always fit into terminal window width, but the data in columns can be cut off, - COLUMNS - like FIXED, but smarter (do not use with huge result sets, see details below), - ROW - each column from the row is displayed in new line, so the full data is displayed. The CLASSIC mode is recommended if you want to see all the data, but you don't want to waste lines for each column. Each row will display full data for every column, but this also means, that columns will not be aligned to each other in next rows. The CLASSIC mode also doesn't respect the width of your terminal (console) window, so if values in columns are wider than the window, the row will be continued in next lines. The FIXED mode is recommended if you want a readable output and you don't care about long data values. Columns will be aligned, making the output a nice table. The width of columns is calculated from width of the console window and a number of columns. The COLUMNS mode is similar to FIXED mode, except it tries to be smart and make columns with shorter values more thin, while columns with longer values get more space. First to shrink are columns with longest headers (so the header names are to be cut off as first), then columns with the longest values are shrinked, up to the moment when all columns fit into terminal window. ATTENTION! The COLUMNS mode reads all the results from the query at once in order to evaluate column widths, therefore it is dangerous to use this mode when working with huge result sets. Keep in mind that this mode will load entire result set into memory. The ROW mode is recommended if you need to see whole values and you don't expect many rows to be displayed, because this mode displays a line of output per each column, so you'll get 10 lines for single row with 10 columns, then if you have 10 of such rows, you will get 100 lines of output (+1 extra line per each row, to separate rows from each other). When called without argument, tells the current output format for a query results. When the <mode> is passed, the mode is changed to the given one. Supported modes are: - CLASSIC - columns are separated by a comma, not aligned, - FIXED - columns have equal and fixed width, they always fit into terminal window width, but the data in columns can be cut off, - COLUMNS - like FIXED, but smarter (do not use with huge result sets, see details below), - ROW - each column from the row is displayed in new line, so the full data is displayed. The CLASSIC mode is recommended if you want to see all the data, but you don't want to waste lines for each column. Each row will display full data for every column, but this also means, that columns will not be aligned to each other in next rows. The CLASSIC mode also doesn't respect the width of your terminal (console) window, so if values in columns are wider than the window, the row will be continued in next lines. The FIXED mode is recommended if you want a readable output and you don't care about long data values. Columns will be aligned, making the output a nice table. The width of columns is calculated from width of the console window and a number of columns. The COLUMNS mode is similar to FIXED mode, except it tries to be smart and make columns with shorter values more thin, while columns with longer values get more space. First to shrink are columns with longest headers (so the header names are to be cut off as first), then columns with the longest values are shrinked, up to the moment when all columns fit into terminal window. ATTENTION! The COLUMNS mode reads all the results from the query at once in order to evaluate column widths, therefore it is dangerous to use this mode when working with huge result sets. Keep in mind that this mode will load entire result set into memory. The ROW mode is recommended if you need to see whole values and you don't expect many rows to be displayed, because this mode displays a line of output per each column, so you'll get 10 lines for single row with 10 columns, then if you have 10 of such rows, you will get 100 lines of output (+1 extra line per each row, to separate rows from each other). CliCommandNullValue Current NULL representation string: %1 Поточний рядок репрезентації NULL: %1 tells or changes the NULL representation string повідомляє або змінює рядок представлення NULL If no argument was passed, it tells what's the current NULL value representation (that is - what is printed in place of NULL values in query results). If the argument is given, then it's used as a new string to be used for NULL representation. При виклику без аргументів відображає поточне представлення значення NULL (тобто що виводиться замість значення NULL у результатах запиту). Якщо вказано аргумент, його буде використано як рядок для представлення значення NULL. CliCommandOpen Cannot call %1 when no database is set to be current. Specify current database with %2 command or pass database name to %3. Неможливо викликати %1, коли база даних не вибрана. Виберіть поточну базу даних командою %2, або передайте ім'я бази даних на %3. Could not add database %1 to list. Не вдалося додати базу даних %1 до списку. File %1 doesn't exist in %2. Cannot open inexisting database with %3 command. To create a new database, use %4 command. Файл %1 не існує в %2. Неможливо відкрити наявну базу даних з командою %3. Щоб створити нову базу даних, використовуйте команду %4. Database %1 has been open and set as the current working database. База даних %1 була відкрита та встановлена як поточна робоча база даних. opens database connection відкриває підключення до бази даних Opens connection to the database. If no additional argument was passed, then the connection is open to the current default database (see help for %1 for details). However if an argument was passed, it can be either <name> of the registered database to open, or it can be <path> to the database file to open. In the second case, the <path> gets registered on the list with a generated name, but only for the period of current application session. After restarting application such database is not restored on the list. Відкриває підключення до бази даних. Якщо жодного додаткового аргументу не було передано, то підключення відкрите до поточної бази даних за замовчуванням (див. довідку %1 для деталей). Однак, якщо аргумент був прийнятий, відкривати може бути або <name> з бази даних зареєстрованої або ж це може бути <path> в базі даних, щоб відкрити. В другому випадку, <path> реєструється зі списком зі згенерованою назвою, але тільки за період поточного сеансу додатків. Після перезапуску такої бази даних не відновлено в списку. name CLI command syntax ім’я path CLI command syntax шлях CliCommandPwd prints the current working directory друкує поточну робочу директорію This is the same as 'pwd' command on Unix systems and 'cd' command without arguments on Windows. It prints current working directory. You can change the current working directory with %1 command and you can also list contents of the current working directory with %2 command. Це те саме, що команда 'pwd' в системах Unix та команда 'cd' без аргументів у Windows. Він друкує поточний робочий каталог. Ви можете змінити поточний робочий каталог за допомогою команди %1, а також можете перерахувати вміст поточного робочого каталогу за допомогою команди %2. CliCommandRemove No such database: %1 Немає такої бази даних: %1 Database removed: %1 База даних видалена: %1 New current database set: Нову поточну базу даних встановлено: removes database from the list видаляє базу даних зі списку Removes <name> database from the list of registered databases. If the database was not on the list (see %1 command), then error message is printed and nothing more happens. Видаляє з списку зареєстрованих баз даних <name> баз даних. Якщо бази даних немає в списку (див. команду %1), то повідомлення про помилку надруковано і більше нічого не відбувається. name CLI command syntax ім’я CliCommandSql No working database is set. Call %1 command to set working database. Call %2 to see list of all databases. Робоча база даних не встановлена. Набрати %1 для встановлення робочої бази даних. Набрати %2 для перегляду списку всіх баз даних. Database is not open. База даних не відкрита. executes SQL query виконується запит SQL This command is executed every time you enter SQL query in command prompt. It executes the query on the current working database (see help for %1 for details). There's no sense in executing this command explicitly. Instead just type the SQL query in the command prompt, without any command prefixed. Ця команда виконується щоразу, коли ви вводите SQL запит у командному рядку. Він виконує запит на поточну робочу базу даних (перегляньте допомогу для %1 для докладної інформації). Існує'не має сенсу виконувати цю команду явно. Замість цього, просто введіть SQL запит у командний рядок без жодного префіксу команди. sql CLI command syntax sql Too many columns to display in %1 mode. Занадто багато стовпців для відображення в режимі %1. Row %1 Рядок %1 Query execution error: %1 Помилка виконання запиту: %1 CliCommandTables No such database: %1. Use %2 to see list of known databases. Немає такої бази даних: %1. Використовуйте %2, щоб переглянути перелік відомих баз даних. Cannot call %1 when no database is set to be current. Specify current database with %2 command or pass database name to %3. Неможливо викликати %1, коли база даних не налаштована на поточну. Вкажіть поточну базу даних з командою %2, або передайте ім'я бази даних на %3. Database %1 is closed. База даних %1 закрита. Database База даних Table Таблиця prints list of tables in the database надрукує список таблиць в базі даних Prints list of tables in given <database> or in the current working database. Note, that the <database> should be the name of the registered database (see %1). The output list includes all tables from any other databases attached to the queried database. When the -s option is given, then system tables are also listed. Друкує перелік таблиць у даній <database> або в поточній базі даних. Зверніть увагу, що <database> має бути ім'я зареєстрованої бази даних (див. %1). Вихідний список включає в себе всі таблиці з будь-яких інших баз даних, прикріплених до запитаної бази даних. Якщо параметр -s вказано, то системні таблиці також списані. database CLI command syntax база даних CliCommandTree No current working database is selected. Use %1 to define one and then run %2. Не вибрано жодної робочої бази даних. Використовуйте %1, щоб визначити одне, а потім запустити %2. Tables Таблиці Views Розріз даних Columns Стовпці Indexes Індекси Triggers Тригери prints all objects in the database as a tree друкує всі об'єкти в базі даних як дерево Prints all objects (tables, indexes, triggers and views) that are in the database as a tree. The tree is very similar to the one that you can see in GUI client of the SQLiteStudio. When -c option is given, then also columns will be listed under each table. When -s option is given, then also system objects will be printed (sqlite_* tables, autoincrement indexes, etc). The database argument is optional and if provided, then only given database will be printed. This is not a registered database name, but instead it's an internal SQLite database name, like 'main', 'temp', or any attached database name. To print tree for other registered database, call %1 first to switch the working database, and then use %2 command. Відображає всі об'єкти (таблиці, індекси, тригери та розріз даних) бази даних у вигляді дерева. Структура дерева подібна до того, що відображається в GUI клієнта SQLiteStudio. При виклику з -c також будуть виведені стовпці під кожною таблицею. При виклику з ключем -s також буде виведено системні об'єкти (таблиці sqlite_*, індекси автоінкремента тощо). При виклику з необов'язковим аргументом 'база даних' будуть виведені об'єкти лише вказаної бази даних. Під 'базою даних' мається на увазі не зареєстроване ім'я бази даних, а внутрішнє ім'я бази даних SQLite, наприклад 'main', 'temp' або ім'я приєднаної бази даних. Для відображення дерева іншої зареєстрованої бази даних спочатку змініть робочу базу даних командою %1, а потім скористайтеся командою %2. CliCommandUse No current database selected. Не обрано поточної бази даних. Current database: %1 Поточна база даних: %1 No such database: %1 Немає такої бази даних: %1 changes default working database змінити типову робочу базу даних Changes current working database to <name>. If the <name> database is not registered in the application, then the error message is printed and no change is made. What is current working database? When you type a SQL query to be executed, it is executed on the default database, which is also known as the current working database. Most of database-related commands can also work using default database, if no database was provided in their arguments. The current database is always identified by command line prompt. The default database is always defined (unless there is no database on the list at all). The default database can be selected in various ways: - using %1 command, - by passing database file name to the application startup parameters, - by passing registered database name to the application startup parameters, - by restoring previously selected default database from saved configuration, - or when default database was not selected by any of the above, then first database from the registered databases list becomes the default one. Changes current working database to <name>. If the <name> database is not registered in the application, then the error message is printed and no change is made. What is current working database? When you type a SQL query to be executed, it is executed on the default database, which is also known as the current working database. Most of database-related commands can also work using default database, if no database was provided in their arguments. The current database is always identified by command line prompt. The default database is always defined (unless there is no database on the list at all). The default database can be selected in various ways: - using %1 command, - by passing database file name to the application startup parameters, - by passing registered database name to the application startup parameters, - by restoring previously selected default database from saved configuration, - or when default database was not selected by any of the above, then first database from the registered databases list becomes the default one. name CLI command syntax ім’я QObject Insufficient number of arguments. Недостатньо кількості аргументів. Too many arguments. Забагато аргументів. Invalid argument value: %1. Expected one of: %2 Неприпустиме значення аргументу: %1. очікувався: %2 Unknown option: %1 CLI command syntax Невідомий параметр: %1 Option %1 requires an argument. CLI command syntax Опція %1 потребує аргументу. string CLI command syntax рядок Command line interface to SQLiteStudio, a SQLite manager. Інтерфейс командного рядка для SQLiteStudio, менеджера баз даних SQLite. Enables debug messages on standard error output. Вмикає повідомлення налагодження при звичайному виході помилки. Enables Lemon parser debug messages for SQL code assistant. Включає вивід налагоджувальних повідомлень аналізатора Lemon для автодоповнення SQL коду. Lists plugins installed in the SQLiteStudio and quits. Виводить список встановлених в SQLiteStudio модулів і здійснює вихід. Executes provided SQL file (including all rich features of SQLiteStudio's query executor) on the specified database file and quits. The database parameter becomes mandatory if this option is used. Executes provided SQL file (including all rich features of SQLiteStudio's query executor) on the specified database file and quits. The database parameter becomes mandatory if this option is used. SQL file SQL file Character encoding to use when reading SQL file (-e option). Use -cl to list available codecs. Defaults to %1. Character encoding to use when reading SQL file (-e option). Use -cl to list available codecs. Defaults to %1. codec codec Lists available codecs to be used with -c option and quits. Lists available codecs to be used with -c option and quits. When used together with -e option, the execution will not stop on an error, but rather continue until the end, ignoring errors. When used together with -e option, the execution will not stop on an error, but rather continue until the end, ignoring errors. file файл Database file to open Файл бази даних для відкриття Invalid codec: %1. Use -cl option to list available codecs. Invalid codec: %1. Use -cl option to list available codecs. Database file argument is mandatory when executing SQL file. Database file argument is mandatory when executing SQL file. Could not open specified database for executing SQL file. You may try using -d option to find out more details. Could not open specified database for executing SQL file. You may try using -d option to find out more details.