New upstream version 3.3.33-1.upstream/3.3.33-1

1 files changed, 45 insertions, 38 deletions

diff --git a/inxi.1 b/inxi.1
index 579ff0a..d515dbb 100644
--- a/inxi.1
+++ b/inxi.1
@@ -15,7 +15,7 @@
 .\"  with this program; if not, write to the Free Software Foundation, Inc.,
 .\"  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 .\"  
-.TH INXI 1 "2024\-01\-30" "inxi" "inxi manual"
+.TH INXI 1 "2024\-02-06"inxi" "inxi manual"
 
 .SH NAME
 inxi \- Command line system information script for console and IRC
@@ -378,6 +378,11 @@ Show WAN IP address and local interfaces (latter requires \fBifconfig\fR or
 Shows both IPv4 and IPv6 link IP addresses.
 
 .TP
+.B \-\-ip\-limit\fR, \fB\-\-limit [\-1 \- x]\fR
+Raise or lower max output limit of IP addresses for \fB\-i\fR. \fB\-1\fR 
+removes limit.
+
+.TP
 .B \-I \fR, \fB\-\-info\fR
 Show Information: processes, uptime, memory, IRC client (or shell type if run 
 in shell, not IRC), inxi version. See \fB\-Ix\fR, \fB\-Ixx\fR, and \fB\-Ia\fR
@@ -421,7 +426,7 @@ base 2 Bytes/s speeds. \fB\-Ja\fR adds USB mode.
 .TP
 .B \-l \fR, \fB\-\-label\fR
 Show partition labels. Use with \fB\-j\fR, \fB\-o\fR, \fB\-p\fR, and \fB\-P\fR 
-to show partition labels. Does nothing without one of those options.
+to show partition labels. Requires one of those options.
 
 Sample: \fB\-ojpl\fR.
 
@@ -681,6 +686,31 @@ To show partition labels or UUIDs (when available and relevant), use with
 \fB\-l\fR or\fB \-u\fR.
 
 .TP
+.B \-\-partitions\-sort\fR, \fB\-\-ps\fR \
+[dev\-base|fs|id|label|percent\-used|size|uuid|used]\fR
+Change default sort order of partition output. Corresponds to 
+\fBPARTITION_SORT\fR configuration item. These are the available sort options:
+
+\fBdev\-base\fR - \fB/dev\fR partition identifier, like \fB/dev/sda1\fR. 
+Note that it's an alphabetic sort, so \fBsda12\fR is before \fBsda2\fR.
+
+\fBfs\fR \- Partition filesystem. Note that sorts will be somewhat random if 
+all filesystems are the same.
+
+\fBid\fR \- Mount point of partition (default).
+
+\fBlabel\fR \- Label of partition. If partitions have no labels, 
+sort will be random.
+
+\fBpercent\-used\fR - Percentage of partition size used.
+
+\fBsize\fR \- KiB size of partition.
+
+\fBuuid\fR \- UUID of the partition.
+
+\fBused\fR \- KiB used of partition.
+
+.TP
 .B \-P \fR, \fB\-\-partitions\fR
 Show basic Partition information.
 Shows, if detected: \fB/ /boot /boot/efi /home /opt /tmp /usr /usr/home /var 
@@ -836,8 +866,8 @@ same line.
 
 .TP
 .B \-u \fR, \fB\-\-uuid\fR
-Show partition UUIDs. Use with \fB\-j\fR, \fB\-o\fR, \fB\-p\fR, and \fB\-P\fR 
-to show partition labels. Does nothing without one of those options.
+Show UUIDs. Use with \fB\-j\fR, \fB\-M\fR \fB\-o\fR, \fB\-p\fR, and \fB\-P\fR to 
+show partition/system board (not common) UUIDs. Requires one of those options.
 
 Sample: \fB\-opju\fR.
 
@@ -1132,11 +1162,6 @@ level only applied if output width is less than max wrap width (see
 indents. Use configuration item \fBINDENTS\fR to make permanent.
 
 .TP
-.B \-\-limit [\-1 \- x]\fR
-Raise or lower max output limit of IP addresses for \fB\-i\fR. \fB\-1\fR 
-removes limit.
-
-.TP
 .B \-\-max\-wrap\fR, \fB\-\-wrap\-max [integer]\fR
 Overrides default or configuration set line starter wrap width value. Wrap max 
 is the maximum width that inxi will wrap line starters (e.g. \fBInfo:\fR) to 
@@ -1165,30 +1190,6 @@ The \fBprint\fR options prints to stdout.
 Required for non\-screen \fB\-\-output\fR formats (json|xml).
 
 .TP
-.B \-\-partition\-sort [dev\-base|fs|id|label|percent\-used|size|uuid|used]\fR
-Change default sort order of partition output. Corresponds to 
-\fBPARTITION_SORT\fR configuration item. These are the available sort options:
-
-\fBdev\-base\fR - \fB/dev\fR partition identifier, like \fB/dev/sda1\fR. 
-Note that it's an alphabetic sort, so \fBsda12\fR is before \fBsda2\fR.
-
-\fBfs\fR \- Partition filesystem. Note that sorts will be somewhat random if 
-all filesystems are the same.
-
-\fBid\fR \- Mount point of partition (default).
-
-\fBlabel\fR \- Label of partition. If partitions have no labels, 
-sort will be random.
-
-\fBpercent\-used\fR - Percentage of partition size used.
-
-\fBsize\fR \- KiB size of partition.
-
-\fBuuid\fR \- UUID of the partition.
-
-\fBused\fR \- KiB used of partition.
-
-.TP
 .B \-\-separator\fR, \fB\-\-sep [character(s)]\fR
 Change the default output key: value separator \fB:\fR to something else. Make
 permanent with configuration item \fBSEP2_CONSOLE\fR.
@@ -1944,7 +1945,8 @@ different from each other. If they are the identical, displays same as
 
 .TP
 .B \-xxx \-M\fR
-\- Adds, if present, board/chassis UUID, 
+\- Adds, if present, board/chassis UUID, This is also activated by 
+\fB\-\-uuid\fR.
 
 .TP
 .B \-xxx \-N\fR
@@ -1974,8 +1976,8 @@ gnome\-panel, lxpanel, tint2, trayer, lxqt\-panel, xfce4\-panel and many
 others. 
 
 \- Adds (if present) \fBtools:\fR item for all detected running screensavers, 
-screen lockers, power daemons. Note that not all screen lockers run as 
-daemons/services, some are just programs called by other tools or actions.
+screen lockers. Note that not all screen lockers run as daemons/services, some 
+are just programs called by other tools or actions.
 
 \- Adds (if available, and in display), virtual terminal (\fBvt\fR) number.
 These are the same as \fBctrl+alt+F[x]\fR numbers usually. Some systems
@@ -2350,7 +2352,8 @@ Graphics:
 states, hibernate suspend \fBimage:\fR size, and if any suspend failures 
 (\fBfails:\fR), how many.
 
-\- Adds power daemons (\fBdaemons:\fR) running.
+\- Adds power daemons/services (\fBservices:\fR) running. Note not all services 
+are daemons. 
 
 \- Adds to Packages number of lib packages detected per package manager. Also 
 adds detected package managers with 0 packages listed. Adds package manager 
@@ -2367,7 +2370,7 @@ Info:
   Processes: 651 Power: uptime: 8d 21h 32m states: freeze,mem,disk
     suspend: deep avail: s2idle wakeups: 14 fails: 3 hibernate: platform
     avail: shutdown,reboot,suspend,test_resume image: 12.49 GiB
-    daemons: upowerd,xfce4\-power\-manager Init: systemd v: 255
+    services: upowerd,xfce4\-power\-manager Init: systemd v: 255
     target: graphical (5) default: graphical tool: systemctl
   Packages: pm: dpkg pkgs: 3960 libs: 2184 tools: apt,apt\-get,aptitude
     pm: rpm pkgs: 0 Compilers: gcc: 13.2.0 alt: 5/6/8/9/10/11/12 Shell: Bash
@@ -2455,6 +2458,10 @@ shown).
 
 \- Adds for USB devices USB mode (Linux only).
 
+\- Adds \fBInfo:\fR line (\fB\-n\fR, \fB\-i\fR only), with running network type 
+\fBservices:\fR. Note not all services are daemons. For example, 
+\fBNetworkManager\fR can be started with \fB\-\-no\-daemon\fR flag.
+
 .TP
 .B \-a \-o\fR
 \- Adds device kernel major:minor number (Linux only).